Flame retardant shade cloth: The shading effect basically reaches 85%-99%, the opening rate varies from 1% to 15%, and it has flame retardant function, which is generally a permanent flame retardant effect.
Embossed shade cloth: Embossed by a special machine to achieve various pattern effects, and the embossed styles are very rich. .
Jacquard shade cloth: Jacquard through a special process to achieve various pattern effects
Metal-coated shade cloth: The fabric is dyed and coated, the front is a sunny fabric, and the back is coated with a metal coating, including silver-plated, aluminum-plated, etc., which can achieve good air permeability and light transmission. At the same time, according to the principle of reflecting ultraviolet rays, the sunshade effect is better than that of ordinary pinhole sunlight fabrics.
Environmentally friendly shade cloth: using environmentally friendly fabrics, no pollution.
Functional sunshade cloth, chemical fiber sunshade cloth (shade curtain), car sunshade cloth, reflective diffused sunshade cloth, folding sunshade cloth, round sand type sunshade cloth, innovative series of sunshade cloth, new type of sunshade cloth, multifunctional sunshade cloth and other sunshade cloth.
Plain weave weave: There are warp and weight flat weave, the fabric surface made of this organization has longitudinal ridges;
Changed twill weave: Based on the twill weave of the original weave, it is obtained by extending the float length of the weave points, changing the fly number of the weave points or the direction of the twill weave, or by combining several methods.
Satin variation weave: Warp or weft yarns form individual, unconnected warp or weft weave points in the fabric, these weave points are evenly distributed, often overshadowed by another system of sand line floats on both sides. The front of the fabric is smooth and shiny, and it feels soft and smooth to the touch.
Complex change organization: It is obtained by various methods on the basis of the three original organization. It still has the characteristics of the original organization and has a more complex pattern effect, but its surface is beautiful and changeable. There are bird's eye tissue, wheat grain tissue, clip flower twill tissue, and reed twill tissue.
Joint Organization: An organization formed by combining two or more kinds of organizations or changing organizations in a variety of ways. Geometric or small pattern effects can be present on the surface of the fabric.
Sara weave: It is a weave with clear and uniform pores on the surface by relying on the intertwining of the warp yarns and the interweaving of the weft yarns.
Stripe weave: Use two or more weave side by side to form a striped or plaid pattern on the surface of the fabric.
Crepe weave: The different floating lengths of warp and weft yarns are staggered, so that the surface of the fabric has the appearance effect of uniform distribution, fine particle-like unevenness, and can make the surface of the fabric crepe.
Honeycomb weave: It can make the fabric have a square, diamond or other geometric shape that is high around and low in the middle, has a honeycomb-like appearance, and has a lattice formed by long warp and weft floating lines.
Through-hole structure: It can produce evenly distributed small hole structure on the surface of the fabric. Because it is similar to the fabric of the leno weave, it has a "false leno weave" or "mold yarn structure".
Rib weave: The surface of the fabric has ridges arranged in longitudinal, transverse, diagonal or other shapes.
Complex weave: This type of weave is an weave formed by the interweaving of multiple groups of warp and weft yarns. There are heavy weave, double weave, fleece weave, leno group.
Heavy weave: Two or more sets of warp yarns are interwoven with a set of weft yarns, or two or more sets of weft yarns are interwoven with a set of warp yarns to form a double or more overlapping weave. Double-sided fabrics can be made.
Double-layer weave: It is a fabric made of two sets of warp yarns and two sets of weft yarns to form overlapping upper and lower layers.
Raising weave: It is composed of a ground weave used to consolidate plush and another structure that forms plush. When finishing, part of the warp or weft is cut off and made to stand upright to form plush on the surface of the fabric.
Jacquard weave: The weave cycle is large and the pattern is more complex, so it can only be weaved on a jacquard machine.
1. Shade, light and ventilation. It can eliminate up to 86% of solar radiation, while keeping indoor air unobstructed and clear view of outdoor scenery.
2. Insulation. The sunshade fabric has good thermal insulation properties that other fabrics do not have, which greatly reduces the utilization rate of indoor air conditioners.
3. Anti-UV shade fabric can resist up to 95% of UV rays.
4. Fireproof. The flame retardant properties of other fabrics are much better.
5. Moisture proof. Bacteria cannot multiply, and the fabric does not go mouldy.
6. Constant size. The material of the sunshine fabric itself determines that it is not malleable, will not deform, and maintain its flatness for a long time.
7. Easy to clean. Can be washed in clean water.
8. Good color fastness.
Polyester, glass fiber, chemical fiber, etc.
Polyester is an important variety of synthetic fibers, and is the trade name of polyester fibers in my country. It is a fiber-forming high polymer obtained from purified terephthalic acid (PTA) or dimethyl terephthalate (DMT) and ethylene glycol (EG) through esterification or transesterification and polycondensation reaction—gather.
Glass fiber is an inorganic non-metallic material with excellent performance and an important part of glass fiber fabrics. English original name: glass fiber. The ingredients are silica, alumina, calcium oxide, boron oxide, magnesium oxide, sodium oxide, etc. It uses glass balls or waste glass as raw materials through high temperature melting, wire drawing, winding, weaving and other processes. Finally, various products are formed. The diameter of glass fiber monofilament ranges from a few microns to more than 20 microns, which is equivalent to 1/20-1/5 of a hair. It is composed of thousands of monofilaments, and is usually used as a reinforcing material in composite materials, electrical insulating materials and thermal insulation materials, circuit substrates, etc., and is widely used in various fields of the national economy.
Chemical fiber is a fiber made of natural or synthetic polymer substances as raw materials. According to the source of raw materials, it can be divided into man-made fibers using natural polymer substances as raw materials and synthetic fibers using synthetic polymer substances as raw materials.
It has the characteristics of good shading effect, non-toxic, odorless, soft to the touch, sound insulation, heat insulation, waterproof, fireproof, UV protection, and protection of human health. Widely used in vertical blinds, roller blinds. In business, administrative office buildings, exhibition halls, libraries, gymnasiums, hotels, conservatories, glass houses, laboratories, cinemas, and courtyards, terraces, conservatories, bedroom windows or commercial pedestrian streets, coffee bars, tea Public places such as squares and other public places widely use sunshade to reflect the concept of leisure and quality life. It is also a model of modern home life and a trend and trend of international home life!
© APANAM 2023